Galvanized Lintel Angle Bar 100 x 100 x 6mm – GALINTEL®


GALINTEL® Galvanized Lintel Angle Bar 100 x 100 x 6mm

GALINTEL® Galvanized Lintel Angle Bars supplied by InfraBuild Construction Solutions (formerly LIBERTY OneSteel Reinforcing) are hot dip galvanized to AS/NZS 4680:2006 to eliminate corroded lintels and cracked brickwork thanks to the generous galvanizing layer.

Lintels achieve an R3 durability rating in accordance with AS/NZS 2699.3:2001 and are covered by a 25 year warranty from the date of installation.

Lintel angle bars are available in 100 x 100 x 6mm and 150 x 100 x 6mm.

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

  • Supporting brickwork over openings (windows and doors) in the building and construction industry


  • Achieves an R3 durability rating
  • Guaranteed against defects in materials and workmanship
  • GALINTEL® hot dip galvanized steel lintels are 40% lighter than solid lintels
  • High strength-to-weight ratio

Relevant Standards

  • AS/NZS 4680:2006 – Hot dip galvanized (zinc) coatings on fabricated ferrous articles
  • AS/NZS 2699.3:2001 – Built in components for masonry
  • AS/NZS 1170.1:2002 – Structural designs actions set

To find out more about the range of GALINTEL® Galvanized Lintel Angle Bars stocked at your local InfraBuild Construction Solutions please contact your nearest branch.


Product Code Length (m) Clear Span Length (m)
GRL109 0.9 0.6
GRL112 1.2 1
GRL114 1.4 1.1
GRL115 1.5 1.2
GRL117 1.7 1.4
GRL118 1.8 1.5
GRL120 2 1.7
GRL121 2.1 1.8
GRL124 2.4 2.1
GRL127 2.7 2.4

Please contact us for any feedback or media enquiries about this content.

How useful was this content?

Help us to serve relevant content to you:

Please tell us which industry sectors best reflect your interests? Please check one or more.