Galvanized Lintel Cavi-T-Bar™ 180 x 8mm – GALINTEL®

Overview

GALINTEL® Galvanized Lintel Cavi-T-Bar™ 180 x 8mm

GALINTEL® Cavi-T-Bar™ Lintels supplied by InfraBuild Construction Solutions (formerly LIBERTY OneSteel Reinforcing) are 25 per cent lighter than built-up steel sections, and a convenient economical substitute for built-up sections such as parallel flange channels and plate. The ideal solution for cavity walls, either double brick, or brick veneer with timber trusses, InfraBuild Construction Solutions' Cavi-T-Bar™ is similar to a T-Bar but with a special top flange incorporated in the upright section.

GALINTEL® Cavi-T-Bars™ are hot dip galvanized to AS/NZS 4680:2006 to achieve an R3 durability rating and are available in Cavi-T-Bar™ Vertical Leg 180 x 8mm with Platform Leg 240 x 8mm and Vertical Leg 240 x 9.5mm with Platform Leg 240 x 8mm.

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

  • For cavity walls, either double brick, or brick veneer

Features

  • Up to 25% lighter than built-up steel sections
  • Convenient, economical substitute for built-up steel sections such as parallel flange channel and plate
  • Fully hot dip galvanized (600 g/m2)
  • Available in standard lengths
  • Full product warranty

Relevant Standards

To find out more about the range of GALINTEL® Cavi-T-Bar™ Lintels stocked at your local InfraBuild Construction Solutions please contact your nearest branch.

Specifications

Product Code Length (m) Clear Opening (m)
CAVT27 2.7 2.4
CAVT30 3 2.7
CAVT33 3.3 3
CAVT36 3.6 3.3

How useful was this content?