Galvanized Lintel Rendabar® 100 x 100 x 8mm – GALINTEL®

Overview

GALINTEL® Galvanized Lintel Rendabar® 100 x 100 x 8mm

GALINTEL® Galvanized Lintel Rendabar® supplied by InfraBuild Construction Solutions (formerly LIBERTY OneSteel Reinforcing)  is a total load-bearing bar, specifically designed to facilitate cement rendering. The bond between mortar, brickwork and lintel forms a composite beam of superior strength and structural rigidity. Galintel Rendabars are considerably lighter than other forms of lintels, contributing to ease of handling and faster construction.  Rendabar's platform leg provides a wide base of support for brickwork and a generous keying area for cement rendering.

Considerably lighter than other forms of lintels with a rendered finish, Rendabar® is easy to handle, promoting faster construction and less damage to green masonry. Mortar bonding with the multi-ribbed section locks the Rendabar® firmly to the masonry providing superior lateral bracing and rigidity.

GALINTEL® Rendabar® is hot dip galvanized to AS/NZS 4680:2006 to achieve an R3 durability rating.

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

  • Specifically designed to facilitate cement rendering

Features

  • Lighter than other forms of lintels used with rendered finish
  • Ribbed profile forms a composite beam of superior strength
  • Fully hot dip galvanized finish to achieve R3 durability rating
  • Complies with Australian Building Code requirements

Relevant Standards

  • AS/NZS 4680:2006 – Hot dip galvanized (zinc) coatings on fabricated ferrous articles
  • AS/NZS 2699.3:2001 – Built in components for masonry
  • AS/NZS 1170.1:2002 – Structural designs actions set

To find out more about the range of GALINTEL® Rendabar® products stocked at your local InfraBuild Construction Solutions please contact your nearest branch.

Specifications

Product Code Length (m) Clear Span Length (m)
RDB09 0.9 0.6
RDB12 1.2 0.9
RDB15 1.5 1.2
RDB18 1.8 1.5
RDB21 2.1 1.8
RDB24 2.4 2.1
"

Please contact us for any feedback or media enquiries about this content.

How useful was this content?

Help us to serve relevant content to you:

Please tell us which of the following best reflects your occupation. Please check one or more.