Galvanized Lintel Traditional Flat 75 x 10mm – GALINTEL®


GALINTEL® Galvanized Lintel Traditional Flat 75 x 10mm

GALINTEL® Galvanized Traditional Flat Bars supplied by InfraBuild Construction Solutions (formerly LIBERTY OneSteel Reinforcing) are lightweight, easy-to-install steel lintel bars made from 300 MPa grade steel and are specifically designed and fully tested to support brickwork over openings such as windows and doors.

GALINTEL® Traditional Flat Bars are fully hot dip galvanized to achieve an R3 durability rating and are available in 75 x 10mm.

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

  • Supporting brickwork over openings (windows and doors) in the building and construction industry


  • Achieves an R3 durability rating
  • Guaranteed against defects in materials and workmanship
  • GALINTEL® hot dip galvanized steel lintels are 40% lighter than solid lintels
  • High strength-to-weight ratio

Relevant Standards

  • AS/NZS 4680:2006 – Hot dip galvanized (zinc) coatings on fabricated ferrous articles
  • AS/NZS 2699.3:2001 – Built in components for masonry
  • AS/NZS 1170.1:2002 – Structural designs actions set

To find out more about the range of GALINTEL® Galvanized Traditional Flat Bars stocked at your local InfraBuild Construction Solutions please contact your nearest branch.


Product Code Length (m) Clear Span Length (m)
A1FG08 0.8 0.6
A1FG09 0.9 0.7
A1FG10 1 0.8
A1FG11 1.1 0.9
A1FG12 1.2 1

Please contact us for any feedback or media enquiries about this content.

How useful was this content?