PaveX™ Crack-A-Joint™ - Danley™

Overview

As an alternative to traditional saw cutting and tooled joints, PaveX™ Crack-A-Joint™  supplied by InfraBuild Construction Solutions (formerly LIBERTY OneSteel Reinforcing) induces a controlled crack to the full depth of the concrete. Available in profile heights of 25mm and 38mm, PaveX™ Crack-A-Joint™ initiates a crack in slabs between 75mm and 150mm in depth. Extruded in UV stabilised uPVC to 3 metres in length, PaveX™ Crack-A-Joint™ is also suitable for use in pavements in chemically corrosive environments including chlorinated or salt-water swimming pool surrounds and coastal environments.

PaveX™ Crack-A-Joint™ Rip-A-Strip Capping and Clip-on Joiners are sold separately.

To find out more about the PaveX™ Crack-A-Joint™ stocked at your local InfraBuild Construction Solutions please contact your nearest branch.

Typical Uses

  • Weakened plane joints in footpaths, bicycle paths, driveways and urban streetscapes

Features

  • Safety: Reduces the risk of cuts and abrasions caused by sharp edges on traditional steel profiles.
  • Immediately initiates a contraction joint in the slab when placed in freshly poured wet concrete.
  • Finish the slab the same day. There is no need to return the next day for saw-cutting.
  • PaveX™ Crack-A-Joint™ will butt up to any given edge, including columns.
  • PaveX ™ Crack-A-Joint™ can be placed quickly, with precision.
  • Lightweight and easy to carry around the job site.
  • Profile heights of 25mm and 38mm initiate controlled cracks in slabs between 75mm and 150mm in depth.
  • Available in 3m standard lengths.
  • Corrosion-Free: PaveX™ Crack-A-Joint™ is extruded from UV stabilised uPVC.
  • Reduces the risk of early shrinkage cracking, producing architecturally aesthetic pavements.
  • No joint filler required: The edge of the PaveX™ Crack-A-Joint™ profile acts as a support for the edge of the concrete and stops unsightly fraying and spalling.
  • Unique profile compliments aggregate interlock which facilitates load transfer.
  • PaveX™ Crack-A-Joint™ provides a low-noise transition over weakened plane joints.

Relevant Standards

AS 3727.1:Residential Pavements.

Specifications


Product Code

Description

ColourProfile Height (mm)Length (m)

Quantity

PXCAJ25

PaveX Crack-A-Joint™

Light Grey253

Pack of 10



PXCAJ38

PaveX Crack-A-Joint™

38

PXCAJCJ

Clip-On Joiner

---

Pack of 50

PXCAJG

Rip-A-Strip Capping

Grey60
1

PXCAJB

Rip-A-Strip Capping

Black

How useful was this content?