Reidbar™ Grout Sleeve

Reidbar™ Grout Sleeve

Reidbar™ Grout Sleeves supplied by InfraBuild Construction Solutions (formerly LIBERTY OneSteel Reinforcing) are used for connecting Reidbar™ lengths where a connection cannot be spun, as well as for converting standard reinforcing bar (rebar) or for vertical connections where continuity of steel reinforcement is required.

Reidbar™ Grout Sleeves are used for connecting Reidbar™ lengths where one side of the connection must be female or when converting to standard reinforcing bar (rebar). The internal surfaces are ribbed to ensure full bar break after sleeve has been filled with high-performance cementitious grout (65 MPa, 28-day compressive strength).

Reidbar™ Grout Sleeves supplied by InfraBuild Construction Solutions are available in various sizes and lengths to suit bar diameters of 12mm, 16mm, 20mm, 25mm and 32mm.

Typical Uses

• Connecting Reidbar™ lengths where one side of the connection cannot be spun
• Converting to standard reinforcing bar or for vertical connections where continuity of reinforcing is required
• Connecting Reidbar™ lengths where one side of the connection must be female or when converting to standard reinforcing bar. The internal surfaces are ribbed to ensure full bar break after sleeve has been filled with high-performance cementitious grout (65MPa, 28-day compressive strength)

Relevant Standards

• AS 3600:2009 Concrete structures

To find out more about the range of Reidbar™ products stocked at your local InfraBuild Construction Solutions please contact your nearest branch.