Galvanized Lintel Angle Bar 150 x 100 x 6mm – GALINTEL®


GALINTEL® Galvanized Lintel Angle Bar 150 x 100 x 6mm

GALINTEL® Lintel Angle Bars supplied by InfraBuild Reinforcing are hot dip galvanized to AS/NZS 4680:2006 to eliminate corroded lintels and cracked brickwork thanks to the generous galvanizing layer.

Lintels achieve an R3 durability rating in accordance with AS/NZS 2699.3:2001 and are covered by a 25 year warranty from the date of installation.

Lintel angle bars are available in 100 x 100 x 6mm and 150 x 100 x 6mm.

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

  • Supporting brickwork over openings (windows and doors) in the building and construction industry


  • Achieves an R3 durability rating
  • Guaranteed against defects in materials and workmanship
  • GALINTEL® hot dip galvanized steel lintels are 40% lighter than solid lintels
  • High strength-to-weight ratio

Relevant Standards

  • AS/NZS 4680:2006 – Hot dip galvanized (zinc) coatings on fabricated ferrous articles
  • AS/NZS 2699.3:2001 – Built in components for masonry
  • AS/NZS 1170.1:2002 – Structural designs actions set

To find out more about the range of GALINTEL® Lintel Angle Bars stocked at your local InfraBuild Reinforcing please contact your nearest branch.


Product Code Length (m) Clear Opening (m)
GRL218 1.8 1.5
GRL220 2 1.7
GRL221 2.1 1.8
GRL224 2.4 2.1
GRL227 2.7 2.4
GRL230 3 2.7
GRL233 3.3 3
GRL236 3.6 3.3
GRL240 4 3.7

How useful was this content?