Galvanized Lintel Angle Bar 150 x 100 x 6mm – GALINTEL®

GALINTEL® Galvanized Lintel Angle Bar 150 x 100 x 6mm

GALINTEL® Lintel Angle Bars supplied by InfraBuild Reinforcing are hot dip galvanized to AS/NZS 4680:2006 to eliminate corroded lintels and cracked brickwork thanks to the generous galvanizing layer.

Lintels achieve an R3 durability rating in accordance with AS/NZS 2699.3:2001 and are covered by a 25 year warranty from the date of installation.

Lintel angle bars are available in 100 x 100 x 6mm and 150 x 100 x 6mm.

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

• Supporting brickwork over openings (windows and doors) in the building and construction industry

Features

• Achieves an R3 durability rating
• Guaranteed against defects in materials and workmanship
• GALINTEL® hot dip galvanized steel lintels are 40% lighter than solid lintels
• High strength-to-weight ratio

Relevant Standards

• AS/NZS 4680:2006 – Hot dip galvanized (zinc) coatings on fabricated ferrous articles
• AS/NZS 2699.3:2001 – Built in components for masonry
• AS/NZS 1170.1:2002 – Structural designs actions set

To find out more about the range of GALINTEL® Lintel Angle Bars stocked at your local InfraBuild Reinforcing please contact your nearest branch.