Galvanized Lintel Traditional Angle 150 x 100 x 10mm – GALINTEL®

GALINTEL® Galvanized Lintel Traditional Angle 150 x 100 x 10mm

GALINTEL® Lintel Traditional Angle Bars supplied by InfraBuild Reinforcing are hot rolled merchant bar lintels manufactured from 300Mpa grade steel. They are traditional steel sections used in the support of brickwork over clear openings and are not reliant on composite action.They meet AS/NZS 4680:2006 to eliminate corroded lintels and cracked brickwork thanks to the generous galvanizing layer.

GALINTEL® Lintel Traditional Angle Bars achieve an R3 durability rating in accordance with AS/NZS 2699.3:2001 and are covered by a 25 year warranty from the date of installation. 

Note: Your design engineer should determine the type, size and length of the GALINTEL® for the brickwork openings by consulting the relevant technical data and safe load table below.

Typical Uses

• Supporting brickwork over openings (windows and doors) in the building and construction industry

Features

• Achieves an R3 durability rating
• Guaranteed against defects in materials and workmanship
• GALINTEL® hot dip galvanized steel lintels are 40% lighter than solid lintels
• High strength-to-weight ratio

Relevant Standards

• AS/NZS 4680:2006 – Hot dip galvanized (zinc) coatings on fabricated ferrous articles
• AS/NZS 2699.3:2001 – Built in components for masonry
• AS/NZS 1170.1:2002 – Structural designs actions set

To find out more about the range of GALINTEL® Lintel Traditional Angle Bars stocked at your local InfraBuild Reinforcing please contact your nearest branch.