DuraGal® Galvanized Steel Angles – DuraGal® Profiles

Overview

DuraGal® Galvanized Steel Angles

Manufactured in Australia, DuraGal® Angles supplied by InfraBuild Steel Centre and made from galvanized steel provide superior strength and corrosion protection in the harshest of environments.

The size chart below shows the range of stock sizes available in DuraGal® Angles.

Typical Uses

Residential construction
Non-residential construction
General applications

Features

250g/m2 minimum average coating of zinc, aluminium and magnesium
Significantly lighter than traditional hot rolled sections
Smooth, consistent surface
Suitable for powdercoating and painting

To find out more about the DuraGal® Angles stocked at your local InfraBuild Steel Centre please contact your nearest branch.

Specifications

Dim 1	Dim 2	Nominal Thickness (9mm)	Length	Mass (kg/m)	Metres per tonne	Length/Pack Standard 6.0	Length/Pack Standard 9.0	Length/Pack Standard 12.0
25x	25x	2.5	6000	0.894	1119	–	–	–
30x	30x	2.5	6000	1.093	915	80	–	–
40x	40x	2.5	6000	1.490	671	60	–	–
40x	40x	4.0	6001	2.310	433	39	–	–
45x	45x	2.5	6000	1.689	592	–	–	–
50x	50x	2.5	6000	1.888	530	33	33	–
50x	50x	4.0	6001	2.943	340	27	27	–
50x	50x	5.0	12001	3.594	278	24	24	24
50x	50x	6.0	9001	4.249	235	–	–	–
65x	65x	4.0	9001	3.892	257	–	–	–
65x	65x	5.0	9001	4.779	209	–	–	–
65x	65x	6.0	9001	5.698	176	–	–	–
75x	75x	4.0	9001	4.525	221	–	–	–
75x	75x	5.0	6001	5.569	180	22	22	–
75x	75x	6.0	9001	6.664	150	–	–	–
90x	90x	5.0	9001	6.754	148	–	–	–
90x	90x	6.0	9001	8.112	123	–	–	–
100x	100x	6.0	12000	9.078	110	–	–	–
150x	150x	6.0	12000	13.907	72	–	–	–